Baby Monitor update version 3.2

Full screen video

Completely redesigned video mode screen to support a full sized viewer.
The system has been internally improved.

Tethering (use your device as a WiFi AP)

You have no WiFi and you need to connect both devices ? Bluetooth range is not enough ?
No problem !

If one of your devices supports acting as a WiFi hotspot, since this version you'll be able to connect both devices using it !

BE CAREFUL: Tethering can increase the data traffic to internet and can represent a possible extra cost in your bill.

Switch between night and day mode automatically

Disabled by default.

The BabyMonitor can change to a darker design under low light conditions or to the regular design when the light comes back.

Select maximum time for video/sound retransmission

You can select the extended sound transmission time after the sound drops below the set level.
Continuous monitoring mode option available.

The video mode will end automatically (energy saving) after 2 minutes. Now you can change this limit.


Minor bugfixes

Baby Monitor update version 3.1.2

Front camera as video source (Android 2.3 and above)

Now you can use any camera from your device to watch your baby.

Under video mode, if there is secondary camera available you'll see a new button.

Video image rotation

Not all devices are equal. Some of you reported that you see the video image rotated.

Now under video mode you'll see a new button that allows you to rotate the image independently of the device you are using.

Bigger video viewer

Baby's side ambient temperature (if the device has ambient temperature sensor)

Only available for the latest devices (hope that during next months there will be more and more) that include ambient temperature sensor.

The temperature may vary if the device is charging.

With this feature you will see the Baby's room ambient temperature at the parent's side!

Fully tested on Galaxy S4

Minor bugfixes

Baby Monitor update version 3.1

Improved sound quality on walkie-talkie mode

Listen a few seconds of the sound coming from the Baby even if he/she stops doing it.

Long click walkie-talkie sensitivity selector to force continuous baby listening

Press during some seconds the walkie-talkie sensitivity selector in one of both sides to enable listening your baby continuously. When you release your finger, the babymonitor will return to the default mode.

Persistent alert if connection is lost

In that case the babymonitor will advertise the parents with an alarm. You can silent the alarm during the reconnection process.

This feature is optional and you can disable it from the settings menu.

New setting for video quality

This will improve your video quality adapting it to your network.

Select lower quality if you are experiencing troubles using poor signal/bandwith wifi networks.

By default the babymonitor will use the highest quality.

Baby Monitor update version 3.0.1

New remote video function

If you use a wifi network then you'll be able to view your baby at parent's device.

Improved automatic search

First of all the parent's device will do a quick search. If this doesn't work then it will do a second search using a different system which is slower but more reliable.


New voice recorder

New integrated utility to record voice messages, music, etc.


Notification when receiving phone calls on Baby's device

Receive a notification at parent's device if someone is calling to the device that is watching the baby.
The baby will continue sleeping and you will be alerted immediately !!


Automatic reconnection if communication is lost

If you lose your bluetooth or wifi signal the parent's device will try to reconnect automatically.


Light compatible with the flash of more devices

Baby Monitor update version 2.5

New functionality to search the Baby's device automatically on wifi networks.

This new feature allows you to locate the Baby's device in a wifi network and connect to it automatically.
If the search operation fails, the Baby Monitor will ask you for the ip address or pin as usual.

Now imagine that you are in a public network like a camping or a hotel and that possibly some other Baby Monitors All-in-One could be there. How the Parent's side will know which is the Baby device I want to connect?

Very simple: take a look at the settings and you will find an option where to introduce a key. This key will identify your devices and mus't be the same on both.

Please remember to change it when using public wifi networks to prevent that one else except you can connect to Baby's device.


Fixed user interface issues with Google Nexus 7 and Samsung Tab 7 (P1000).

Solves reported interface issues with those models.


Remember last pin/ip used.

After a successful wifi connection the pin or ip address used will be remembered for the next connection.


Internal improvements.

How to avoid wifi disconnections using Walkie-Talkie

On your Android phone:

For Android 2.3 and earlier

1) Navigate to Menu > Settings > Wireless & Networks > Wi-Fi settings> and select the menu button again.
2) You’ll be prompted to either scan or select advanced. Select “Advanced”
3) Select “Wifi sleep policy” , and you will have a couple of options to select from. Choose “Never”.

For Android 4.0 (Ice Cream Sandwich) and later:

1) Navigate to Menu > Settings > WiFi and select the menu button again.
2) Select Options, Advanced
3) Set “Keep WiFi on during sleep” to “Always”

Baby Monitor update version 2.4

• Polish translation. 
• Now adapted to tablets and landscape orientation. 
• Parent's side device make a short vibration when detects noise from Baby. 
• Minor bugfixes.

Corrects some issues with Samsung Galaxy S devices and Nanny mode.